TM 9-2320-365-20-5
20-504
Change 2
20-86 DIGITIZATION KIT INSTALLATION (CONT)
(28) Apply sealant to threads of two screws (32 and 33).
(29) Position two washers (34) and screws (32) on lower
rear support (35).
(30) Position two washers (36) and screws (33) on
upper rear support (37).
(31) Apply sealant to threads of six screws (38) and eight
screws (39).
(32) Position top support (40) in cab with six washers (41)
and screws (38).
(33) Position eight washers (42) and screws (39) in top
support (40).
(34) Tighten eight screws (39) to 110-120 lb-in. (12-13
N•m).
(35) Tighten six screws (26), three screws (29), two
screws (32), two screws (33), and six screws (38) to
70-85 lb-in. (8-10 N•m).
WARNING
Adhesives,
solvents,
and
sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets
on
skin
or
clothing,
wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.