TM 9-2320-365-20-5
Change 2
20-195
(61) Apply sealing compound do threads of fitting (105)
and 90 degree fitting (106).
(62) Install fitting (105) and 90 degree fitting (106) in
EMI shielded heater fuel pump couplings (107).
(63) Install EMI shielded fuel pump ground wire (108) to
sub frame (109) with screw (110), washer (111), and
locknut (112).
(64) Install EMI shielded fuel pump assembly (113) on
sub frame (109) with two screws (114), washer
(115), lockwasher (116), and nuts (117).
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing.
To prevent injury or
death, keep away from open fire and use
in a well-ventilated area. If adhesive,
solvent, or sealing compound gets on
skin or clothing, wash immediately with
soap and water.
Failure to comply may
result in injury to personnel.