TM 9-2320-365-20-5
20-196
Change 2
20-41.
M1079 HEATER KIT INSTALLATION/REMOVAL (CONT)
(65) Remove plug (118) from auxiliary supply port
(119).
(66) Retain plug (118) for future use.
(67) Disconnect fuel hose (120) from 90-degree return
fitting (121).
(68) Remove 90-degree return fitting (121) from fuel tank (122).
(69) Apply sealing compound to threads of run tee fitting
(123), fitting (124), and plug (125).
(70) Install run tee fitting (123) in auxiliary supply port
(126).
(71) Install fitting (124) and plug (125) on run tee fitting
(123).
WARNING
WARNING
Diesel fuel is flammable.
If fuel is spilled,
clean it up immediately. Failure to comply
may result in serious injury or death to
personnel.
NOTE
Remove plastic cable ties as required.
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To prevent injury or death,
keep away from open fire and use in a
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap
and water.
Failure to comply may result
in injury to personnel.