TM-9-2320-365-20-5
M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-365-20-5 - Page 91 of 666
TM 9-2320-365-20-5
Change 2
20-237
20-46.
M1079 HEATER FUEL TUBES/HOSES REPLACEMENT
This task covers:
a.
Removal
b.
Installation
c.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
AC power disconnected (TM 9-2320-365-10).
LH and RH doors opened (115 degrees) (TM 9-2320-365-
10).
Spare tire lowered (TM 9-2320-365-10).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Materials/Parts
Sealant, Pipe, Teflon (Item 58, Appendix D)
Dispenser, Pressure Sensitive Adhesive Tape (Item
21, Appendix D)
Lockwasher (18) (Item 84, Appendix G)
Lockwasher (3) (Item 83, Appendix G)
Ties, Cable, Plastic (Item 76, Appendix D)
a. Removal.
(1)
Disconnect connector P244 (1) from heater
connector (2).
(2)
Disconnect connector P245A (3) from heater control
unit (4).
(3)
Remove 18 screws (5), lockwashers (6), washers (7),
heater deflector (8), and heater cover (9) from van
body wall (10).
Discard lockwashers.
NOTE
Tag connector and connection points prior to
disconnecting.
Back to Top
