TM-9-2320-365-34-2
M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2
AUGUST 2005
CHANGE 2
TM-9-2320-365-34-2 - Page 1098 of 1414
TM 9-2320-365-34-2
21-11. REAR OUTPUT HOUSING REPAIR
This task covers:
a. Disassembly
b. Cleaning/Inspection
c. Assembly
d. Bearing Preload Adjustment
e. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Transfer case module disassembled (para 22-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 68, Appendix B)
Puller Kit, Universal (Item 44, Appendix B)
Indicator, Dial (Item 30, Appendix B)
Inserter, Bearing and Bushing (TM 9-2320-365-20)
Gloves, Rubber (Item 23, Appendix B)
Handle, Drive (TM 9-2320-365-20)
Caliper, Vernier (Item 8, Appendix B)
Press, Arbor, Hand Operated (Item 41, Appendix
B)
Tools and Special Tools (Cont)
Inserter, Bearing and Bushing (TM 9-2320-365-20)
Pliers, Retaining Ring (Item 37, Appendix B)
Goggles, Industrial (Item 25, Appendix B)
Inserter, Bearing and Bushing (TM 9-2320-365-20)
Inserter, Bearing and Bushing (TM 9-2320-365-20)
Materials/Parts
Rag, Wiping (Item 59, Appendix C)
Oil, Lubricating (Item 44, Appendix C)
Seal, Plain Encased (Item 265, Appendix F)
Solvent, Dry Cleaning (Item 81, Appendix C)
a. Disassembly.
WARNING
Use care when removing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to
comply
may
result
in
injury
to
personnel.
(1) Remove retaining ring (1) and ring gear (2) from output
housing (3).
21-54
Back to Top
