TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 1113 of 1414

TM 9-2320-365-34-2

c. Assembly.

NOTE

Apply lubricating oil to all parts during

assembly.

(1) Install bushing (1) in sleeve (2).

(2) Install sleeve (2) in C6 clutch housing (3).

(3) Install seal rings (4 and 5) and C6 piston (6) in C6 clutch

housing (3).

WARNING

Use care when installing retaining rings.

Retaining rings are under tension and can

act as projectiles when released. Failure

to

comply

may

result

in

injury

to

personnel.

(4) Install spring retainer (7) in C6 clutch housing (3) with

retaining ring (8).

(5) Install thrust bearing (9) in C6 clutch housing (3).

(6) Install five C6 reaction plates (10) and C6 friction plates

(11), alternately, starting with C6 reaction plate on drive

hub (12).

(7) Position C6 drive hub (12) in C6 clutch housing (3).

(8) Install C6 backing plate (13) in C6 clutch housing (3).

CAUTION

If transmission is prior to S/N 6510072173, C6

thrust bearing must be replaced.

Failure to

comply may result in damage to equipment.

(9) Install retaining ring (14) in C6 clutch housing (3).

d. Follow-On Maintenance.

Assemble transfer case module (para 22-3).

End of Task.

21-69