TM 9-2320-365-34-2
21-15. C7 CLUTCH HOUSING AND FRONT OUTPUT HOUSING ASSEMBLY REPAIR
(CONT)
(7) Install C7 backing plate (11) in C7 clutch housing (2).
WARNING
Use care when installing retaining rings.
Retaining rings are under tension and can
act as projectiles when released. Failure
to
comply
may
result
in
injury
to
personnel.
(8) Install retaining ring (12) in C7 clutch housing (2).
(9) Install two roller bearing cups (13) in front output housing
(14).
(10) Install roller bearing cone (15) on front output housing
(14).
(11) Install shim(s) (16) and spacer (17) on front output shaft
(18).
(12) Install roller bearing cone (19) on front output shaft (18).
21-76