TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 1151 of 1414

TM 9-2320-365-34-2

CAUTION

Pinion drive and ring gear are machined in

matched sets and must be replaced at the

same time. Failure to comply may result in

damage to equipment.

(16) Inspect pinion drive (15) for visible cracks, wear, or

damage.

(17) Inspect ring gear (16) for visible cracks, wear, or

damage.

(18) Inspect differential case (17) for visible cracks, wear, or

damage.

(19) Inspect hub body (18) for visible cracks, wear, or

damage.

c. Assembly.

WARNING

Adhesives,

solvents,

and

sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area. If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water. Failure

to

comply

may

result

in

injury

to

personnel.

(1) Apply four or five drops of adhesive sealant in 16

threaded holes on hub body (1).

(2) Apply sealing compound to mounting surface of hub

body (1).

(3) Position ring gear (2) on hub body (1) with 16 washers

(3) and screws (4).

(4) Tighten 16 screws (4) to 85-115 lb-ft (115-156 N·m).

(5) Install bearing cone (5) on hub body (1).

23-9