TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 1179 of 1414

TM 9-2320-365-34-2

Change 2

24-17

(40) Apply adhesive sealant to shims (36) and mounting

flange of differential carrier housing (17).

(41) Position shims (36), bearing cage (29), and pinion

drive (25) on differential carrier housing (17) with

eight washers (37) and screws (32).

(42) Tighten eight screws (32) to 44-55 lb-ft (60-75 N•m).

(43) Apply a small amount of sealing compound to

outside edge and spring cavity of yoke seal (38).

(44) Install yoke seal (38) on input yoke (33).

(44) Apply adhesive sealant to threads of self-locking nut

(34).

(45) Install input yoke (33) on pinion drive (25) with self-

locking nut (34).

(46) Tighten self-locking nut (34) to 920-1130 lb-ft

(1248-1532 N•m).

(47) Tighten self-lockig nut (34) to 920-1130 lb-ft (1248-

1532 N•m).

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing.

Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water.

Failure

to comply may result in injury to

personnel.

NOTE

A minimum of three shims must be installed.