TM-9-2320-365-34-2
M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2
AUGUST 2005
CHANGE 2
TM-9-2320-365-34-2 - Page 1187 of 1414
TM 9-2320-365-34-2
APPENDIX B
TOOLS IDENTIFICATION LIST
Section I. INTRODUCTION
B-1. INTRODUCTION
This appendix lists common tools, supplements, and special tools/fixtures that are suggested for maintenance tasks
performed at the direct support/general support maintenance level.
B-2. EXPLANATION OF COLUMNS
a. Column (1) - Item Number.
This number is assigned to the entry in the listing and is referenced in the narrative
instructions to identify the item, e.g., "Bar, Pry (Item 1, Appendix B)."
b. Column (2) - Item Name.
This column contains the nomenclature for the item.
c. Column (3) - National Stock Number.
This is the national stock number assigned to the item which you can use
to requisition it.
d. Column (4) - Part Number.
This provides the Government, manufacturer, or vendor part number for the item.
e. Column (5) - Reference.
This column contains the shop catalog (SC), technical manual, or other publication
which provides an illustration and description of the item, or lists whether the item is fabricated.
Section II. TOOLS IDENTIFICATION LIST
(1)
Item
Number
(2)
Item Name
(3)
National
Stock Number
(4)
Part
Number
(5)
Reference
1
ADAPTER, SOCKET
WRENCH
11655788-3
SC 4910-95-A31
2
ADAPTER, SOCKET
WRENCH
A-A-2172
SC 4910-95-A31
3
ADAPTER, SOCKET
WRENCH
GAX-1
SC 4910-95-A31
4
BLADE, HAND,
HACKSAW
RS1018
SC 5180-90-CL-N05
5
BRUSH, WIRE
D-1416
SC 4910-95-A31
6
CALIPER SET,
MICROMETER,
6181
SC 4910-95-A31
7
CALIPER,
MICROMETER,
124B
SC 4910-95-A02
8
CALIPER, VERNIER
6420
SC 4910-95-A31
B-1
Back to Top
