TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 143 of 1414

TM 9-2320-365-34-2

e. Installation.

NOTE

If intake and exhaust push rods are being

replaced, the new intake and exhaust push

rods will be of the same size diameter.

(1) Install intake and exhaust valve push rods (1) and fuel

injector push rod (2) in cylinder head (3).

CAUTION

Hold rocker arm group level when installing

on engine to prevent accidental disassembly.

Failure to comply may result in damage to

equipment.

NOTE

All six rocker arm groups are installed the

same way. No. 1 rocker arm group shown.

(2) Position rocker arm group (4) on cylinder head (3).

NOTE

Perform step (3) on No. 1 cylinder rocker arm

group.

(3) Position deflector (5) on rocker arm group (4).

3-93