TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 380 of 1414

TM 9-2320-365-34-2

7-8. ROTATING CLUTCH SOLENOID ASSEMBLY REPLACEMENT/REPAIR (CONT)

(3) Remove two screws (4) and pressure switch (5) from

rotating clutch valve body (2).

(4) Remove preformed packing (6) from pressure switch

(5). Discard preformed packing.

WARNING

Use care when removing springs. Springs

are under tension and can act as

projectiles when released. Failure to

comply may result in injury to personnel.

CAUTION

Retaining pins are removed from the bottom of

solenoid body. Failure to comply may result in

damage to equipment.

(5) Remove retaining pin (7), solenoid (8), regulator valve

(9), and spring (10) from rotating clutch valve body (2).

(6) Remove preformed packings (11 and 12) from

solenoid (8). Discard preformed packings.

(7) Perform steps (5) and (6) on remaining two solenoids

(8).

7-58