TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 389 of 1414

TM 9-2320-365-34-2

7-10. CONTROL VALVE MODULE REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-365-10).

Front drive shaft removed (TM 9-2320-365-20-3).

Transmission oil filters removed (TM 9-2320-365-20-

3).

Tools and Special Tools

Tool Kit, Genl Mech (Item 68, Appendix B)

Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B)

Wrench, Torque, 0-150 lb-in. (Item 79, Appendix B)

Jack, Dolly Type, Hydraulic (Item 31, Appendix B)

Goggles, Industrial (Item 25, Appendix B)

Tools/Special Tools (Cont)

Wrench Set, Socket (Item 75, Appendix B)

Materials/Parts

Screw, Cap, Hex Head (3) (M10x1.5x55) (Item 77,

Appendix C)

Nut, Self-Locking (2) (Item 146, Appendix F)

Seal (Item 260, Appendix F)

Gasket (Item 36, Appendix F)

Lubricating Oil, Gear (Item 49, Appendix C)

Personnel Required

(2)

WARNING

•

Wear appropriate eye protection when

working under vehicle due to the

possibility of falling debris. Failure to

comply may result in injury to personnel.

• Ensure exhaust system is cool before

performing maintenance. Failure to comply

may result in injury to personnel.

a. Removal.

(1) Remove self-locking nut (1) from clamp (2). Discard

self-locking nut.

(2) Disconnect lower exhaust pipe (3) from muffler (4).

(3) Remove clamp (2) from lower exhaust pipe (3).

Change1

7-67