TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 442 of 1414

TM 9-2320-365-34-2

7-120

Change 2

7-18.

TRANSMISSION ASSEMBLY REPLACEMENT (UNUSUAL CONDITIONS) (CONT)

(17) Position 12 washers (14) and bolts (15) in torque

converter housing module (16).

(18) Tighten 12 bolts (15) to 37-45 lb-ft (50-61 N•m).

(19) Position preformed packing (17) on 90-degree

fitting (17).

(20) Install 90-degree fitting (18) on transmission (2).

(21) Remove five bolts (8) and transmission lifting

bracket from adapter housing module (9).

(22) Position five bolts (8) in adapter housing module (9).

(23) Tighten five bolts (8) to 42-50 lb-ft (57-68 N•m).

(24) Position six bolts (19) in flexplate (20).

(25) Tighten six bolts (19) to 25-29 lb-ft (34-39 N•m).

(26) Install plug (21) in flywheel housing (22).

NOTE

Perform steps (19) and (20) on vehicles

equipped with PTO.

NOTE

•

Perform steps (24) through (26) on

vehicle serial numbers and higher.

•

Steps (24) and (25) require the aid of an

assistant.

•

During installation of flexplate bolts,

access each flexplate bolt by turning

alternator pulley through a series of short

arcs.