TM 9-2320-365-34-2
NOTE
Perform steps (62) through (67) on vehicles
equipped with transmission oil cooler
hoses.
(62) Install preformed packings (61 and 66) on 90-degree
fittings (62 and 63).
(63) Position 90-degree fittings (62 and 63) on transmission
(2).
(64) Tighten jam nuts (64) on 90-degree fittings (62 and
63).
(65) Position transmission oil cooler hose (65) on 90-
degree fitting (62).
(66) Position transmission oil cooler hose (65) on 90-
degree fitting (63).
(67) Tighten transmission oil cooler hoses (59 and 65) to
94-104 lb-ft (127-141 N·m).
NOTE
• Perform steps (68) and (69) on vehicles
equipped with transmission oil cooler hoses.
• Steps (68) and (69) require the aid of an
assistant.
(68) Position lower front support crossmember (67) on
vehicle with four bolts (68) and self-locking nuts (69).
(69) Tighten four self-locking nuts (69) to 117-131 lb-ft
(159-178 N·m).
Change 1
7-125