TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 557 of 1414

TM 9-2320-365-34-2

NOTE

Steps (33) and (34) must be performed together.

(33) Turn steering wheel to right until stops are reached and hold for ten seconds.

(34) Check pressure reading on STE/ICE-R. Pressure reading should be between 500-1000 psi (3448-6895 kPa).

(35) Turn wheels straight ahead.

NOTE

If pressure reading is not within range,

bottom adjustment screw is turned to right to

increase

pressure

or

turned

to

left

to

decreases pressure.

(36) Loosen locknut (16) on bottom adjustment screw (19).

(37) Adjust bottom adjustment screw (19) to left or right.

(38) Turn steering wheel to right until stops are reached and

verify pressure is 650-750 psi (4482-5171 kPa).

(39) Turn wheels straight ahead.

CAUTION

Ensure adjustment screw does not turn

when tightening locknut. Failure to comply

may result in damage to equipment.

NOTE

Repeat steps (37) through (38) until pressure

reading of 650-750 psi (4482-5171 kPa) is

obtained.

(40) Tighten locknut (16) on bottom adjustment screw (19) to

22 lb-ft (30 N·m).

(41) Turn steering wheel to left until stops are reached and

hold for ten seconds.

(42) Check pressure reading on STE/ICE-R.

Pressure

reading should be between 500-1000 psi (3448-6895

kPa).

12-13