TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 585 of 1414

TM 9-2320-365-34-2

NOTE

Left

and

right

side

of

shock

mount

crossmember is installed the same way. Left

side shown.

(3) Position bracket (3) on valve panel (2) with six washers

(4), three screws (5), and self-locking nuts (6).

(4) Tighten three self-locking nuts (6) to 14-18 lb-ft (20-24

N·m).

(5) Position shock absorber (7) on lower bracket (8) with bolt

(9), two washers (10) and self-locking nut (11).

(6) Position bolt (12) and shock absorber (7) in shock mount

crossmember (1) with washer (13) and self-locking nut

(14).

(7) Tighten self-locking nuts (11 and 14) to 195-239 lb-ft

(264-324 N·m).

(8) Perform steps (3) through (7) on right side of shock

mount crossmember.

e. Follow-On Maintenance.

(1) Install frame plates (M1081) (para 13-11).

(2) Install rear spring bracket (para 13-9).

(3) Install load sensing valve and bracket (TM 9-2320-365-

20-3).

(4) Install rear crossmember (para 13-6).

(5) Install resilient mount and mechanical stops (M1078)

(TM 9-2320-365-20-3).

(6) Install rear bumper (para 13-8).

(7) Install

stabilizer

mounting bracket

(para 14-7).

Change 1

13-25

(7.1) Install van body (TM 9-2320-365-20-4).ss

(8) Install cargo bed (para 15-8).