TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 587 of 1414

TM 9-2320-365-34-2

(3) Remove two collars (4), bolts (5), and rear bumper (3)

from vehicle. Discard collars and bolts.

b. Installation.

NOTE

•

Steps (1) through (4) require the aid of an

assistant.

•

Left and right side or rear bumper is installed

the same way. Left side shown.

(1) Position rear bumper (1) on vehicle with two bolts (2)

and self-locking nuts (3).

(2) Tighten two self-locking nuts (3) to 210-225 lb-ft (285-

305 N·m).

(3) Position five bolts (4) and self-locking nuts (5) in rear

bumper (1).

(4) Tighten five self-locking nuts (5) to 210-225 lb-ft (285-

305 N·m).

(5) Perform steps (3) and (4) on right side of rear bumper.

c. Follow-On Maintenance.

Install rear fenders (TM 9-2320-365-20-4).

End of Task.

13-27