TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 638 of 1414

TM 9-2320-365-34-2

13-15. M1081 SUBFRAME RAIL REPLACEMENT (CONT)

b. Installation.

NOTE

• Left and right side subframe rails are installed

the same way. Right side shown.

• Install subframe rails from rear of vehicle.

• Step (1) requires the aid of two assistants.

(1) Position subframe rail (1) on vehicle.

CAUTION

Ensure subframe rail flange is in contact with

main frame rail flange.

Failure to comply

may result in damage to equipment.

NOTE

Steps (2) through (9) require the aid of an

assistant.

(2) Position three bolts (2) in bracket (3) with three self-

locking nuts (4).

(3) Tighten three self-locking nuts (4) to 210-225 lb-ft (285-

305 N·m).

(4) Position two bolts (5) in bracket (6) with two self-locking

nuts (7).

(5) Tighten two self-locking nuts (7) to 210-225 lb-ft (285-

305 N·m).

(6) Position two bolts (8) in rear support brace (9) with two

self-locking nuts (10).

(7) Tighten two self-locking nuts (10) to 210-225 lb-ft (285-

305 N·m).

13-78

Change 1