TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 694 of 1414

TM 9-2320-365-34-2

14-7. STABILIZER MOUNTING BRACKET REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Rear stabilizer bar removed (TM 9-2320-365-20-3).

Tools and Special Tools

Tool Kit, Genl Mech (Item 68, Appendix B)

Wrench, Impact, Electric (Item 77, Appendix B)

Socket Set, Impact (Item 50, Appendix B)

Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B)

Tools and Special Tools (Cont)

Wrench Set, Socket (Item 74, Appendix B)

Goggles, Industrial (Item 25, Appendix B)

Materials/Parts

Bolt (6) (Item 6, Appendix F)

Nut, Self-Locking (6) (Item 134, Appendix F)

WARNING

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

a. Removal.

CAUTION

When removing bolts, continuous removal of

collars is mandatory. Failure to comply will

result in seizing of collar to bolt.

NOTE

Left

and

right

side

stabilizer

mounting

brackets are removed the same way. Right

side shown.

Remove three collars (1), bolts (2), and mounting bracket

(3) from frame (4). Discard collars and bolts.

14-36