TM-9-2320-365-34-2
M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2
AUGUST 2005
CHANGE 2
TM-9-2320-365-34-2 - Page 699 of 1414
TM –9-2320-365-34-2
Change 2
15-3
15-2.
CAB REPLACEMENT (CONT)
INITIAL SETUP (CONT)
Materials/Parts
Ties, Cable Plastic (Item 89, Appendix C)
Compound, Sealing (Item 70, Appendix C)
Rubber Sheet, Solid (Item 63, Appendix C)
Lockwasher (2) (Item 101, Appendix F)
Nut, Self-locking (Item 133, Appendix F)
Lockwasher (2) (Item 102, Appendix F)
Pin, Cotter (Item 229, Appendix F)
Nut, Self-locking (Item 140, Appendix F)
Washer, Spring Tension (Item 303, Appendix F)
Nut, Self-locking (3) (Item 137, Appendix F)
Washer, Spring Tension (Item 302, Appendix F)
Nut, Plain, Hex. (Item 120, Appendix F)
Nut, Self-locking (Item 136, Appendix F)
Plug, Rubber (13) (Item 240, Appendix F)
Lockwasher (Item 105, Appendix F)
Plug, Rubber (2) (Item 241, Appendix F)
Plug, Rubber (4) (Item 241, Appendix F)
Materials/Parts (Cont)
Seal, Door (2) (Item 257, Appendix F)
Plug, Rubber (2) (Item 238, Appendix F)
Plug, Rubber (10) (Item 238, Appendix F)
Plug, Plastic (10) (Item 235, Appendix F)
Plug, Plastic (2) (Item 234, Appendix F)
Rivet, Compression (4) (Item 250, Appendix F)
Plug, Rubber (2) (Item 236, Appendix F)
Nut, Clinch (61) (Item 116, Appendix F)
Nut, Clinch (4) (Item 117, Appendix F)
Plug, Rubber (10) (Item 237, Appendix F)
Plug, Rubber (6) (Item 239, Appendix F)
Adhesive (Item 10, Appendix C)
Nut, Self-Locking (4) (Item 135.1, Appendix F)
Washer, Seal (4) (Item 301.1, Appendix F
Personnel Required
(2)
a. Removal.
(1)
Remove vacuum hose (1) from dashboard (2).
(2)
Remove engine control cable assembly (3) and
start and charging cable assembly (4) from
dashboard (2).
(3) Disconnect connector P119 (5) from connector J119
(6).
(4)
Remove vacuum hose (1) from cab (7).
(5) Remove engine control cable assembly (3), start and
charging cable assembly (4), and grommet (8) from
cab (7).
NOTE
Remove plastic cable ties as required.
NOTE
Steps (4) and (5) require the aid of an
assistant.
Back to Top
