TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 815 of 1414

TM 9-2320-365-34-2

15-6. M1081 CAB WINDSHIELD FRAME REPLACEMENT/REPAIR

This task covers:

a. Removal

b. Disassembly

c. Assembly

d. Installation

e. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

M1081 cab roof removed (TM 9-2320-365-20-4).

Cab windshield removed (para 15-7).

Tools and Special Tools

Tool Kit, Genl Mech (Item 68, Appendix B)

Wrench, Torque, 0-200 lb-in. (Item 81, Appendix

B)

Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B)

Wrench Set, Socket (TM 9-2320-365-20)

Socket Set, Socket Wrench (Item 51, Appendix B)

Materials/Parts

Washer, Flat (Item 91, Appendix C)

Nut, Self-locking (Item 52, Appendix C)

Lockwasher (Item 97, Appendix F)

Screw, Captive (10) (Item 253, Appendix F)

Seal (79 in. (2000 mm)) (Item 254, Appendix F)

Lubricating Oil, Engine (Item 48, Appendix C)

Seal (2) (87 in. (2200 mm)) (Item 254, Appendix F)

Personnel Required

(3)

a. Removal.

NOTE

Left and right side wiper arms are removed

the same way. Left side shown.

(1) Disconnect windshield washer hose (1) from fitting (2).

(2) Lift cover (3) at base of wiper arm (4).

(3) Remove nut (5) and lockwasher (6) from wiper arm shaft

(7). Discard lockwasher.

NOTE

Mark position of wiper arm prior to removal.

(4) Remove wiper arm (4) from wiper arm shaft (7).

(5) Perform steps (1) through (4) on right side wiper arm.

15-107