TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 820 of 1414

TM 9-2320-365-34-2

15-6. M1081 CAB WINDSHIELD FRAME REPLACEMENT/REPAIR (CONT)

(7) Position sunvisor (11) on windshield frame (2) with four

screws (12).

(8) Tighten four screws (12) to 22-27 lb-in. (2-3 N·m).

(9) Install seal (13) on windshield frame (2).

CAUTION

Use care when installing captive screws.

Failure to comply may result in damage to

equipment.

NOTE

• Lubricate captive screws prior to installation.

• All captive screws are installed the same way.

One shown.

• Tighten nut until captive screw is seated.

(10) Install captive screw (14) in windshield frame (2) with

washer and nut.

(11) Remove nut and washer from captive screw (14).

(12) Perform steps (10) and (11) on remaining nine captive

screws.

(13) Position five centering cups (15) on windshield frame (2)

with five screws (16).

(14) Tighten five screws (16) to 62-124 lb-in. (7-14 N·m).

15-112