TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 872 of 1414

TM 9-2320-365-34-2

16-5. HYDRAULIC ROTARY PUMP REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-on Maintenance

INITIAL SETUP

Equipment Conditions

Splash guard removed (TM 9-2320-365-20-4).

Air cleaner removed (TM 9-2320-365-20-3)

Tools and Special Tools

Tool Kit, Genl Mech (Item 68, Appendix B)

Wrench, Torque, 0-175 lb-ft (Item 80, Appendix

B)

Goggles, Industrial (Item 25, Appendix B)

Materials/Parts

Cap and Plug Set (Item 18 Appendix C)

Packing, Preformed (Item 211, Appendix F)

Packing, Preformed (Item 209, Appendix F)

Dispenser, Pressure Sensitive Adhesive Tape (Item

31, Appendix C)

Personnel Required

(2)

WARNING

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility

of falling debris. Failure to

comply may result in injury to personnel.

a. Removal.

CAUTION

Cap or plug hydraulic hoses and fittings to

prevent contamination of hydraulic system.

Failure to comply may result in damage to

equipment.

NOTE

Tag hydraulic hoses and connection points

prior to disconnecting.

(1) Disconnect hydraulic hoses (1 and 2) from fitting (3) and

90 degree fitting (4).

NOTE

Step (2) requires the aid of an assistant.

(2) Remove two screws (5), washers (6), and hydraulic

rotary pump (7) from PTO (8).

16-24