TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 880 of 1414

TM 9-2320-365-34-2

16-6. POWER TAKE-OFF (PTO) REPLACEMENT/REPAIR (CONT)

WARNING

Use care when removing retaining rings.

Retaining rings are under tension and can

act as projectiles when released. Failure

to

comply

may

result

in

injury

to

personnel.

(5) Remove retaining ring (7) from bearing cap (2).

(6) Remove output shaft (8) from bearing cap (2).

(7) Remove retaining ring (9) and bearing (10) from bearing

cap (2).

(8) Remove spacer (11) from output shaft (8).

(9) Remove retaining ring (12) from output shaft (8).

(10) Remove clutch back-up cylinder (13), vee ring (14), and

piston (15) from output shaft (8).

NOTE

Perform step (11) on PTO Assembly (P/N

276XMF-JX-D5XK).

(11) Remove key (16) from output shaft (8).

(12) Remove spring (17) from output shaft (8).

(13) Remove two preformed packings (18) from output shaft

(8). Discard preformed packings.

(14) Remove seven clutch plates (19) and eight friction plates

(20) from output shaft (8).

16-30

Change 1