TM-9-2320-365-34-2
M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2
AUGUST 2005
CHANGE 2
TM-9-2320-365-34-2 - Page 898 of 1414
TM 9-2320-365-34-2
16-40.4
Change 2
16-6.
POWER TAKE-OFF (PTO) REPLACEMENT/REPAIR (CONT)
(12.1) Tighten four screws (15).
(12.2) Tighten four screws (15) to 26-35 lb-ft (35-47 N•m).
(12.3) Fold tabs on four screws (15).
(13) Install preformed packing (16) on fitting (17).
(14) Install fitting (17) on transmission oil cooler (18).
(14.1)
Install preformed packing (18.1) on fitting (17).
NOTE
•
Perform steps (13) through (14.9) on
vehicles equipped with transmission oil
cooler tubes.
•
Perform steps (13) and (14) on vehicles
not previously equipped with corrosive
enhanced fittings.
NOTE
•
Perform the following step on kits
equipped with shearhead screws.
•
Alternately tighten screws.
•
When correct torque is reached, bearing
cup small screw hex head will break off.
NOTE
Perform the following two steps on bearing
cups equipped with tabs.
Back to Top
