TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 980 of 1414

TM 9-2320-365-34-2

19-2. INITIAL MACHINE GUN RING KIT INSTALLATION/REMOVAL (CONT)

(61) Deleted.

(62) Deleted.

(63) Deleted.

NOTE

• Align ring spacer and washers with threaded

holes in cab roof.

• Ring spacer should have 1/4 in. clearance from

inner lip of cab roof to allow free rotation of

machine gun ring.

(64) Position ring spacer (57) and 12 washers (58) on cab

roof (51).

WARNING

Machine

gun

ring

assembly

weighs

approximately 350 lbs (159 kgs). Attach a

suitable lifting device prior to installation.

Failure to comply may result in injury to

personnel or damage to equipment.

NOTE

Steps (65) through (69) require the aid of an

assistant.

(65) Position three wooden blocks on cab roof (51).

(66) Position machine gun ring (59) on three wooden blocks.

19-12

Change 1