TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005

CHANGE 2

TM-9-2320-365-34-2 - Page 974 of 1414

TM 9-2320-365-34-2

19-6

Change 2

19-2.

INITIAL MACHINE GUN RING KIT INSTALLATION/REMOVAL (CONT)

(21) Position lower platform (27) on top platform (8) with

two quick-release pins (28).

(22) Place lower platform (27) in raised position with

legs (24) fully forward and support brackets (23)

flush with cab floor (9).

(23) Mark outline of support bracket (23).

(24) Cut floor mat (13) around outline of support bracket

(23).

(25) Mark and center punch location of four support

bracket holes (29) on cab floor (9).

(26) Fold lower platform (27) back to rest on top platform

(8).

(27) Drill four 10 mm holes (29) in cab floor (9).

(28) Install four clinch nuts (14) in holes (29).

(29) Rotate lower platform (27) back in raised position.

(30) Position two brackets (23) on cab floor (9) with four

washers (30) and screws (31).

(30.1) Tighten four screws (31) to 71-89 lb-in. (8-10 N•m).

NOTE

Remove all rubber material under floor mat

to have metal to metal contact between

clinch nuts and cab floor.