TM-9-2320-365-34-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE; VOLUME NO. 2 OF 2

AUGUST 2005
CHANGE 2

  TM-9-2320-365-34-2 - Page 990 of 1414

TM 9-2320-365-34-2
20-2. ENGINE TO MAINTENANCE STAND MOUNTING (CONT)
b. Demounting.
WARNING
Engine weighs approximately 1500 lbs
(681 kgs). Attach a suitable lifting device
prior to demounting from maintenance
stand.
Failure to comply may result in
injury
to
personnel
or
damage
to
equipment.
NOTE
Steps (1) and (2) require the aid of an
assistant.
(1) Remove four nuts (1), bolts (2), and engine (3) from
engine maintenance stand.
(2) Position engine (3) on engine transport stand.
(3) Remove six bolts (4) and engine stand bracket from
engine (3).
(4) Install tee fitting (5) on oil manifold (6).
(5) Position preformed packing (7) and oil manifold (6) on
engine (3).
(6) Install two washers (8) and bolts (9) in oil manifold (6).
(7) Position gasket (10) and oil tube (11) on center side
cover (12).
(8) Install two washers (13) and bolts (14) in oil tube (11).
20-4


Back to Top