TM 9-2320-366-10-2
NOTE
Wrecker REMOTE CONTROL may be connected on either side of the
vehicle. Right side connection shown.
(2) Remove dust cap (2) from receptacle (3).
(3) Connect wrecker REMOTE CONTROL (1) to receptacle (3).
NOTE
Wrecker remote control switches operate the same as levers on
WRECKER CONTROL PANEL. For example; where procedure calls f
or STINGER lever to be positioned to IN, position STINGER IN/OUT
switch on wrecker remote control to IN.
(4) Position STATION SELECTOR switch (4) to REMOTE CONTROL.
(5) Lower underlift assembly (para 2-44d).
Change 1
2-487