TM 9-2320-366-10-2
Table 3-5. General Cleaning Instructions (Cont)
Cleaning Materials Used to Remove
Surface
Oil/Grease
Salt/Mud/
Dust/Debris
Surface
Rust/Corrosion
Radiator/
Auxiliary
Transmission
Oil Cooler
Not applicable.
Low pressure
water, air, soapy
warm water, and
damp or dry rags.
Not applicable.
Rubber
Insulation
Damp or dry rags.
Damp or dry rags.
Not applicable.
Tires
Soapy water and
bristle brush.
High pressure
water and bristle
brush.
Not applicable.
Cable
Cleaning compound
and wire brush.
Wire brush.
Wire brush and
lubricating oil.
*
* After cleaning, apply light grade of lubricating oil to all unprotected surfaces to
prevent continued rust.
a. Cleaning Exterior.
Wash vehicle per table 3-5 General
Cleaning Instructions.
b. Cleaning Interior.
CAUTION
Do not allow water to contact
electrical controls, gages, or
indicators. Failure to comply
may result in damage to
equipment.
(1) Remove loose dirt and dust from
instrument panel (1) with damp wiping
rag.
3-113