TM-9-2320-366-20-1
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-1 - Page 1183 of 1824
TM 9-2320-366-20-1
TM 9-2320-366-20-1
TM 9-2320-366-20-1
TM 9-2320-366-20-1
TM 9-2320-366-20-1
2-629
2-629
2-629
2-629
2-629
CONTINUITY TEST
CONTINUITY TEST
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter to
lamp socket.
(3)
Connect negative (-) probe of multimeter to
ground and note reading on multimeter.
(4)
If continuity is not present, repair wire 3091
(para 2-45) or replace front lights cable
assembly (para 7-82).
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter to
inside of blackout drive light housing.
(3)
Connect negative (-) probe of multimeter to
lamp socket and note reading on multimeter.
(4)
If continuity is not present, replace blackout
drive light (para 7-37).
(5)
If continuity is present, replace lamp
(para 7-37).
(6)
Install lamp in socket.
(7)
Install gasket and cover on housing with
three screws.
Back to Top
