TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 1189 of 1824

TM 9-2320-366-20-1

VOLTAGE TEST

(1) Disconnect connector P17 from blackout

drive light connector.

(2) Set multimeter to volts dc.

(3) Connect positive (+) probe of multimeter

to connector P17.

(4) Connect negative (-) probe of multimeter to

ground.

(5) Position main light switch to BO DRIVE

(TM 9-2320-366-10-1) and note reading on

multimeter.

(6) If 12 vdc is not present, repair wire 19

(para 2-45) or replace front lights cable

assembly (para 7-82).

(7) If 12 vdc is present, repair wire 3091

(para 2-45) or replace front lights cable

assembly (para 7-82).

(8) Position main light switch to OFF

(TM 9-2320-366-10-1).

(9) Connect connector P17 to blackout drive

light connector.

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle.

Jewelry can catch on equipment and

cause injury or short across electrical circuits

and cause severe burns or electrical shock.

WARNING

2-635