TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 1299 of 1824

TM 9-2320-366-20-1

VOLTAGE TEST

WARNING

Change 1

2-745

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle.

Jewelry can catch on equipment and

cause injury or short across electrical circuits

and cause severe burns or electrical shock.

(1) Set multimeter to volts DC.

(2) Connect positive (+) probe of multimeter

to stoplight lamp socket center contact.

(3) Connect negative (-) probe of multimeter to

ground.

(4) Position master power switch to on

(TM 9-2320-366-10-1).

(5) Position main light switch to STOPLIGHT

(TM 9-2320-366-10-1).

(6) Apply brakes and note reading on

multimeter.

(7) If 12 VDC is not present, go to step 5 of

this fault.

(8) Position master power switch to off

(TM 9-2320-366-10-1).

(9) Position main light switch to OFF

(TM 9-2320-366-10-1).

(10) Install lamp in socket.

(11) Install preformed packing and cover

on housing with six screws.