TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 1497 of 1824

TM 9-2320-366-20-1

TM 9-2320-366-20-1

TM 9-2320-366-20-1

TM 9-2320-366-20-1

TM 9-2320-366-20-1

2-933

2-933

2-933

2-933

2-933

VOLTAGE TEST

Remove rings, bracelets, watches,

necklaces, and any other jewelry

before working around vehicle.

Jewelry can catch on equipment

and cause injury or short across

electrical circuit and cause severe

burns or electrical shock.

WARNING

(1)

Remove kick panel (para 16-3).

(2)

Disconnect connector P99 from connector

J99.

(3)

Set multimeter to volts dc.

(4)

Connect positive (+) probe of multimeter to

connector P99-1.

(5)

Connect negative (-) probe of multimeter to

ground.

(6)

Position master power switch to on

(TM 9-2320-366-10-1) and note reading on

multimeter.

(7)

If 24 vdc is not present, repair wire 1803

(para 2-45) or replace WTEC II dashboard

cable assembly (para 7-10) or WTEC III

dashboard cable assembly (para 7-11).

(8)

If 24 vdc is present, repair wire 1803

(para 2-45) or replace chemical alarm kit

cable assembly (para 7-59).

(9)

Position master power switch to off

(TM 9-2320-366-10-1).

(10)

Connect connector P99 to connector J99.

(11)

Install kick panel (para 16-3).