TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 1567 of 1824

TM 9-2320-366-20-1

E-7. M1089 30K WINCH TEST ADAPTER

Assemble the M1089 30K winch test adapter according to the following steps. Refer to the following parts list and

Figure E-11. M1089 30K Winch Test Adapter

for details.

Part Number

Material Description

National Stock

Number

Qty

4-4-4 100401BA

Tee, Tube

4730-01-095-3430

1

4-6 100102BA

Adapter, Straight, Pipe to Tube

4730-01-096-9398

1

207P-4

Coupling, Pipe

4730-00-881-1161

1

NB-4-035

Tubing, Nonmetallic

4720-01-071-4042

4 in.

MIL-T-27730

Tape, Antiseizing

8030-00-889-3534

1 roll

Figure E-11. M1089 30K Winch Test Adapter

a. All dimensions are in inches (millimeters).

b. Cut two pieces of nonmetallic tubing (1 and 2) to 2.0 in. (50.8 mm) long.

c. Remove three nuts (3), sleeves (4), and ferrules (5) from tube tee (6).

d. Install two nuts (3), sleeves (4), and ferrules (5) on nonmetallic tubing (1).

e. Install nonmetallic tubing (1) on tube tee (6).

f. Remove nut (7), sleeve (8), and ferrule (9) from straight adapter (10).

g. Install two nuts (3 and 7), sleeves (4 and 8), and ferrules (5 and 9) on nonmetallic tubing (2).

h. Install nonmetallic tubing (2) on tube tee (6).

i. Install nut (9) on straight adapter (10).

j. Apply one wrap of antiseizing tape to threads of straight adapter (10).

k. Install pipe coupling (11) on straight adapter (10).

Change

Change 1

1

E-15

E-15