TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 1583 of 1824

TM 9-2320-366-20-1

E-24. M1089 30K WINCH PNEUMATIC TEST ADAPTER

Assembly the M1089 30K winch pneumatic test adapter to the following steps. Refer to the following parts list and

Figure E-18. M1089 30K Winch Pneumatic Test Adapter

for details.

Part Number

Material Description

National Stock Number

Qty.

NB-4-035

Tubing, Nonmetallic

4720-01-071-4042

14 in. (355.6 mm)

MIL-T-27730

Tape, antiseizing

8030-00-889-3534

1 roll

207P-4

Coupling, Pipe

4730-00-881-1161

1

4-6 100102 BA

Adapter, Straight, Pipe to

Tube

4730-01-096-9398

1

4-4 100101 BA

Nipple, Tube

4730-01-091-4012

1

Figure E-18. M1089 30K Winch Pneumatic Test Adapter

a. All dimensions are in inches (millimeter).

b. Cut piece of nonmetallic tubing (1) to 14.0 in. (355.6 mm).

c. Remove two nuts (2), ferrules (3), and sleeves (4) from tube nipple (5).

d. Install nut (2), ferrule (3), and sleeve (4) on nonmetallic tubing (1).

e. Install nonmetallic tubing (1) on tube nipple (5).

f. Remove nut (6), ferrule (7), and sleeve (8) from straight adapter (9).

g. Install nut (6), ferrule (7), and sleeve (8) on nonmetallic tubing (1).

h. Install nonmetallic tubing (1) on straight adapter (9).

i. Apply on wrap of antiseizing tape to threads of straight adapter (9).

j. Install pipe coupling (10) on straight adapter (9).

k. Retain nut (2), ferrule (3), and sleeve (4) for future use.

Change 1

E-31/(E-32 Blank)