TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 335 of 1824

VOLTAGE TEST

WARNING

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle.

Jewelry can catch on equipment and

cause injury or short across electrical circuits

and cause severe burns or electrical shock.

(1) Install relay K24 in PDP.

(2) Disconnect batteries (para 7-57).

(3) Remove relay K1 from PDP.

(4) Connect batteries (para 7-57).

(5) Set multimeter to volts DC.

(6) Connect positive (+) probe of multimeter

to relay K1 socket 86 on PDP.

(7) Connect negative (-) probe of multimeter to

ground.

(8) Position master power switch to on

(TM 9-2320-366-10-1) and note reading on

multimeter.

(9) If 24 VDC is not present, go to step 29 of

this fault.

(10) Position master power switch to off

(TM 9-2320-366-10-1).

TM 9-2320-366-20-1

Change 1

2-205