TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006
CHANGE 3

  TM-9-2320-366-20-1 - Page 340 of 1824

e2. ENGINE DOES NOT CRANK (CONT)
KNOWN INFO
TEST OPTIONS
POSSIBLE PROBLEMS
YES
Faulty dashboard cable
assembly.
REASON FOR QUESTION
If continuity is not present,
wire 1658 is faulty.
If
continuity is present, wire
1929 is faulty.
24.
NO
Transmission pushbutton
shift selector in neutral (N).
Batteries OK.
Service drive lights OK.
Circuit breakers OK.
Starting motor OK.
Battery to starter cable
assembly OK.
Oil pressure switch OK.
Neutral start relay OK.
WTEC II vehicle interface
module (VIM) OK.
WTEC II cab transmission
wiring harness OK.
WTEC II transmission ECU
pushbutton shift selector
(TEPSS) OK.
Relay K26 OK.
WTEC III transmission
pushbutton shift selector
(TPSS) OK.
Repair wire 1929 from terminal board TB1
position 64 to circuit breaker CB77 socket 5
(para 2-45) or replace WTEC II dashboard cable
assembly (para 7-10) or WTEC III dashboard
cable assembly (para 7-11).
Is continuity present from
relay K11 socket 30 on PDP
to terminal board TB1
position 64 on PDP?
Repair wire 1658 from relay K11 socket 30
on PDP to terminal board TB1 position 64 (para
2-45) or replace WTEC II dashboard cable
assembly (para 7-10) or WTEC III dashboard
cable assembly (para 7-11).
Continuity Test or
STE/ICE-R Test #91
TM 9-2320-366-20-1
2-210
Change 1


Back to Top