TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 437 of 1824

VOLTAGE TEST

(1)

Remove circuit breaker CB39 from PDP.

(2)

Set multimeter to volts DC.

(3)

Connect positive (+) probe of multimeter to

circuit breaker CB39 socket 3 on PDP.

(4)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(5)

If 24 VDC is not present, go to step 13 of

this fault.

(6)

Install circuit breaker CB39 in PDP.

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle.

Jewelry can catch on equipment and

cause injury or short across electrical circuits

and cause severe burns or electrical shock.

WARNING

TM 9-2320-366-20-1

Change 1

2-273