TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 441 of 1824

CONTINUITY TEST

(1)

Remove circuit breaker CB70 from PDP.

(2)

Position master power switch to on

(TM 9-2320-366-10-1).

(3)

Set multimeter to ohms.

(4)

Connect positive (+) probe of multimeter to

relay K2 socket 86 on PDP.

(5)

Connect negative (-) probe of multimeter to

circuit breaker CB70 socket 4 on PDP and

note reading on multimeter.

(6)

If continuity is not present, go to step 14

of this fault.

(7)

Position master power switch to off

(TM 9-2320-366-10-1).

(8)

Install circuit breaker CB70 in PDP.

TM 9-2320-366-20-1

Change 1

2-277