TM 9-2320-366-20-1
Personnel Required
(2)
References
TM 9-4910-571-12&P
START
1.
KNOWN INFO
TEST OPTIONS
REASON FOR QUESTION
YES
NO
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
STE/ICE-R (Item 41, Appendix C)
Multimeter, Digital (Item 22, Appendix C)
Continuity Test or
STE/ICE-R Test #91
CAUTION
Read CAUTION
on following page.
If continuity is not present,
wire 3020 is faulty.
e18D. VOLTS GAGE DOES NOT ILLUMINATE
WATER TEMP gage
illuminates.
POSSIBLE PROBLEMS
Faulty dashboard cable
assembly.
Faulty VOLTS gage.
Is continuity present from
connector PX10 socket 1 to
a known good ground?
Repair wire 3020 from connector PX10
socket 1 to connector PX11 socket 1
(para 2-45) or replace WTEC II dashboard
cable assembly (para 7-10) or WTEC III
dashboard cable assembly (para 7-11).
2-390.14
Change 1