TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 633 of 1824

TM 9-2320-366-20-1

CONTINUITY TEST

NOTE

Inspect connector pins/sockets for damage,

corrosion, and serviceability.

Check that

connector pins are not pushed back and

are capable of making good contact.

Use care when testing electrical connectors.

Do not damage connector pins or sockets

with multimeter probes.

Failure to comply

may result in damage to equipment.

CAUTION

Change 1

2-390.7

(1)

Remove instrument panel assembly for

access (para 7-15).

(2)

Disconnect connector clamp from FRONT

BRAKE AIR gage connector.

(3)

Disconnect connector PX4 from FRONT

BRAKE AIR gage connector.

(4)

Set multimeter to ohms.

(5)

Connect positive (+) probe of multimeter to

connector PX4 socket 1.

(6)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(7)

If continuity is not present, repair wire 3020

from connector PX4 socket 1 to connector

PX8 socket 1 (para 2-45) or replace

WTEC II dashboard cable assembly (para

7-10) or WTEC III dashboard cable assembly

(para 7-11).