TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 625 of 1824

TM 9-2320-366-20-1

Change 1

2-389

CONTINUITY TEST

NOTE

Inspect connector pins/sockets for damage,

corrosion, and serviceability.

Check that

connector pins are not pushed back and

are capable of making good contact.

(1)

Remove instrument panel assembly for

access (para 7-15).

(2)

Disconnect connector clamp from REAR

BRAKE AIR gage connector.

(3)

Disconnect connector PX5 from REAR

BRAKE AIR gage connector.

(4)

Set multimeter to ohms.

(5)

Connect positive (+) probe of multimeter to

connector PX5 socket 1.

(6)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(7)

If continuity is not present, repair wire 3020

from connector PX5 socket 1 to connector

PX13A socket 2 (para 2-45) or replace

WTEC II dashboard cable assembly (para

7-10) or WTEC III dashboard cable assembly

(para 7-11).

Use care when testing electrical connectors.

Do not damage connector pins or sockets

with multimeter probes.

Failure to comply

may result in damage to equipment.

CAUTION