TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 749 of 1824

CONTINUITY TEST

NOTE

CAUTION

TM 9-2320-366-20-1

Change 1

2-461

(1)

Disconnect batteries (para 7-57).

(2)

Remove four screws from lighted

indicator display.

(3)

Remove lighted indicator display from

instrument panel assembly.

(4)

Disconnect connector PX7 from lighted

indicator display.

(5)

Set multimeter to ohms.

(6)

Connect positive (+) probe of multimeter

to lighted indicator display socket 27.

(7)

Connect negative (-) probe of multimeter

to lighted indicator display socket 11

and note reading on multimeter.

(8)

If continuity is not present, go to step 6

of this faulty.

(9)

If continuity is present, repair wire 1616

from connector PX7 pin 11 to splice E2

(para 2-45) or replace WTEC II dashboard

cable assembly (para 7-10) or WTEC III

dashboard cable assembly (para 7-11).

Inspect connector pins/sockets for damage,

corrosion, and serviceability.

Check that

connector pins are not pushed back and

are capable of making good contact.

Use care when testing electrical connectors.

Do not damage connector pins or sockets

with multimeter probes.

Failure to comply

may result in damage to equipment.