TM-9-2320-366-20-1

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-1 - Page 757 of 1824

CONTINUITY TEST

TM 9-2320-366-20-1

Change 1

2-469

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter

to terminal lug TL201.

(3)

Connect negative (-) probe of multimeter

to ground and note reading on multimeter.

(4)

If continuity is not present, repair wire

3024 from terminal lug TL201 to terminal

lug TL126 (para 2-45) or replace front

lights cable assembly (para 7-82).

(5)

If continuity is present, replace low

pressure transmitter (para 11-30).

(6)

Position front grille on cab with washer and

screw.

(7)

Position two washers and screws in front

grille.

(8)

Tighten screw to 48-60 lb-in. (5-7 N·m).

(9)

Tighten two screws to 24 lb-in. (3 N·m).

(10)

Install PDP in dashboard with three screws.

(11)

Install three washers and screws in PDP.

(12)

Install PDP cover (para 16-2).