TM 9-2320-366-20-1
TM 9-2320-366-20-1
TM 9-2320-366-20-1
TM 9-2320-366-20-1
TM 9-2320-366-20-1
2-473
2-473
2-473
2-473
2-473
CONTINUITY TEST
(1)
Disconnect connector P216 from connector J216.
(2)
Set multimeter to ohms.
(3)
Connect positive (+) probe of multimeter to
connector PX7-10.
(4)
Connect negative (-) probe of multimeter to
connector P216-B and note reading on
multimeter.
(5)
If continuity is not present, go to step 5 of
this fault.