TM-9-2320-366-20-2

M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-366-20-2 - Page 1001 of 1632

RESISTANCE TEST

Change 1

2-1757

TM 9-2320-366-20-2

(1)

Set multimeter to ohms.

(2)

Connect positive (+) prove of multimeter

to connector P119h.

(3)

Connect negative (-) probe of multimeter to

connector P119j and note reading on

multimeter.

(4)

If resistance is high (20,000 ohms or

higher), replace WTEC III transmission ECU

(para 8-7).

(5)

If resistance is low (less than 20,000

ohms), notify DS maintenance.

(6)

Install instrument panel assembly (para

7-15).

(7)

Connect connector P119 to connector

J119.

(8)

Position front grille on cab with washer

and screw.

(9)

Position two washers and screws in front

grille.

(10)

Tighten screw to 48-60 lb-in. (5-7 N·m).

(11)

Tighten two screws to 24 lb-in. (3 N·m).

(12)

Connect connector P114 to WTEC III

transmission ECU.

(13)

Connect connector clamp on connector

P114.

(14)

Install kick panel (para 16-3).

(15)

Clear diagnostic codes (para 8-5).