TM-9-2320-366-20-2
M1083 SERIES, 5 TON, 6x6, MEDIUM TACTICAL VEHICLES (MTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-366-20-2 - Page 1003 of 1632
CAUTION
CLUTCH PRESSURE TEST
Change 1
2-1759
TM 9-2320-366-20-2
WARNING
Wear appropriate eye protection when
working under vehicle due to the possibility
of falling debris.
Failure to comply may
result in injury to personnel.
Loose or dirty connectors may cause
intermittent loss of power to transmission
ECU and diagnostic codes to be logged.
Ensure that all connectors are clean and tight
before performing troubleshooting.
Failure to
comply may result in incorrect test results.
Sub
Code
22
11
44
66
88
99
Range VER
Range VER
Range VER
Range VER
Range VER
Range VER
1st
4th
2nd
6th
N1
N2/N4
Sub Code Meaning
Table 2-38.
Sub Code Range
(10)
Remove pipe to tube adapter, hose, and
tube to boss adapter from C3 pressure tap.
(11)
Position preformed packing and C3
pressure tap plug in control valve module.
(12)
Tighten C3 pressure tap plug to 84-120
lb-in. (9-14 N·m).
(13)
Remove drain pan under C3 pressure tap
plug.
(14)
Install front and intermediate propeller
shafts (para 9-2).
(1)
Remove front and intermediate propeller
shafts (para 9-2).
(2)
Position drain pan under C3 pressure tap
plug.
(3)
Remove C3 pressure tap plug and
preformed packing from control valve
module.
Discard preformed packing.
(4)
Connect tube to boss adapter, hose, and
pipe to tube adapter to C3 pressure tap.
(5)
Perform STE/ICE-R Test # 50 (TM 9-4910-
571-12&P).
(6)
Start engine (TM 9-2320-366-10-1) and
run at idle.
(7)
With parking brake applied, make shift
indicated by sub code while assistant
notes reading on STE/ICE-R. Refer to
Table 2-38.
Sub Code Range.
(8)
If pressure does not drop to zero in
selected range indicated by code values,
notify DS Maintenance.
(9)
Shut down engine (TM 9-2320-366-10-1).
Back to Top
