WARNING
CAUTION
Read WARNING and
CAUTION on
following page.
1.
KNOWN INFO
TEST OPTIONS
Voltage Test or
STE/ICE-R Test #89
REASON FOR QUESTION
NO
YES
START
NOTE
POSSIBLE PROBLEMS
Perform Electrical System Troubleshooting
e1. CIRCUIT BREAKER DOES NOT OPERATE
on circuit breakers CB43 and CB79 prior to
beginning this task.
12 VDC and 24 VDC circuits
operate.
Circuit breaker CB43 OK.
Circuit breaker CB79 OK.
Is 24 VDC present at
connector P115 socket 16?
If 24 VDC is not present,
WTEC III dashboard cable
assembly is faulty.
Repair wire 136 from connector
P115 sockets 16 to circuit breaker
CB43 (para 2-45) or replace WTEC III
dashboard cable assembly (para 7-11).
Faulty WTEC III dashboard
cable assembly.
Faulty terminal board TB1.
Faulty WTEC III ECU.
Faulty WTEC III TPSS.
TM 9-2320-366-20-2
f40. WTEC III TRANSMISSION PUSHBUTTON SHIFT SELECTOR (TPSS) DOES NOT
ILLUMINATE
INITAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-366-10-1).
Kick panel removed (para 16-3).
Tools and Special Tools
Tool Kit, Genl Mech (Item 46, Appendix C)
STE/ICE-R (Item 41, Appendix C)
Multimeter, Digital (Item 22, Appendix C)
Personnel Required
(2)
References
TM 9-4910-571-12&P
2-1822.12
Change 1